Instructions For Application Of Underarm Liner to Garment

Before you begin, make sure your garment is Clean (has not been worn without washing) as your underarm liner will not stick to a garment that has deodorant residue.

1. Turn garment inside out / expose the underarm seam & place on hard flat surface.

2. Remove backing paper carefully and place the larger half of the liner on the body side of underarm seam and the smaller half of the liner on the sleeve side of underarm seam.

3. Press down firmly for 10 seconds then run fingers firmly out to edges to ensure firm adhesion to garment.

When removing the liner, you may notice that part / some of the liner may stay behind on your garment - this may happen as the glue adhesive has been formulated to "melt" with ones body heat. DO NOT PANIC !! When you are ready to wash your garment, simply through the garment in a normal, cool wash and before drying your garment any remnants will simply and easily peel straight off! If your garment is clean and you wish to simply replace your Sweax Underarm Liners and wear the garment again, you can place a new liner on top on any residue and again, once you are ready to wash your garment, wash as per normal in a cool wash and the liners remnants will pull off very easily! (Sweax Underarm Liners will not disintergrate in the wash like a tissue)

PLEASE NOTE: These liners will not stop you from sweating and are to be used in conjunction with a deodorant.

CAUTION: If irritation develops, discontinue use. Consult your physician if irritation persists.
Do not re-use liner. Remove liner from garment before washing. Please dispose of thoughtfully. Do not flush.

STORE IN A COOL DRY PLACE.
Avoid direct heat as this may distort liner and effect glue adhesive.